Asian Paints Wall Putty

PRECAUTIONSDo not apply the material without pre - wetting the surface for the 1st coat
Pre wet the surface before application of the 2nd coat of putty
Ensure the material is mixed homogeneously with water and allowed to stand for 5-10 mins
before application
Do not sand the material vigorously with Emery Paper otherwise it will reduce the strength of
the material
Do not apply the material to fill cracks
Though the material is non-toxic, care should be taken to avoid dust inhalation while mixing
and handling
SAFETY FEATURESKindly refer to the MSDS for Asian Paints Asian Wall Putty which gives detailed information on
safety measures while handling the paint.
Keep out of reach of children and away from food, drink
May be harmful if swallowed. In case of ingestion seek immediate medical attention.
Wear eye protection during application. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
In case of skin contact immediately wash skin with soap and plenty of water. Get medical
attention if irritation develops or persists.
It is recommended to wear suitable nose pad during sanding and surface preparation to avoid
dust inhalation
Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth.
Safety Data Sheet available on request.
No added Lead, Mercury or Chromium compounds
POST PAINTING CAREIt is important to apply a coat of Exterior Wall
Primer or SmartCare Primero over Asian Wall
Putty before application of emulsion
TECHNICAL DETAILSa. Drying time: Surface dry time 30 min
b. Sheen levels: NA
c. Flash point IS101/1987 Part 1, Sec 6: NA
d. Stability of thinned paint: To be used
within 45 minutes