Waterproofing

PRECAUTIONSRepair the hallow surface area before applying Damp Proof Ultra coat.
For miscellaneous surface like tiling, smooth and glossy cementitious surface, product should be
used with Asian Paints SmartCare Terrace Tile primer.
For horizontal surfaces, use Asian Paints SmartCare Joints Tapes at all joints & corners for better
reinforcement.
For oily, existing failure coating surface, carry patch tests to check adhesion of product to
substrate.
The forced coverage leads to long term performance hence it is recommended to ensure
coverage as per datasheet only.
Do not apply during rains or extreme temperatures.
Not recommended for rain water harvesting purpose.
Avoid abuses which may lead to puncturing of membrane.
Ensure that the product is applied at least 6 inches inside the drain pipe.
For best results, apply coating on parapet walls as well.
SAFETY FEATURESKindly refer to the MSDS for Asian Paints SmartCare Damp Proof Ultra which gives detailed
information on safety measures while handling the paint, which is available on request.
Store the container with the lid tightly closed in an upright position, in a cool, dry place
Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion seek immediate medical attention.
Wear eye protection during application. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
In case of skin contact immediately wash skin with soap and plenty of water. Get medical
attention if irritation develops or persists.
Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding
and surface preparation to avoid dust inhalation.
Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth.
No added Lead, Mercury or Chromium compounds.
POST PAINTING CAREFor the best performance of the paint, ensure
proper washing and cleaning of all algal and
fungal growth, if any, at regular intervals of
six months
TECHNICAL DETAILSa. Form: Ready to use viscous liquid
b. Application temperature: 5ºC to 35ºC
c. Appearance: Viscous Liquid
d. Color: White
e. Specific Gravity: 1.15 gm/cc
f. Water Resistance: 10
g. Alkali Resistence: 8
h. Viscosity Sormer: 124-138 KU
i. Solids by wt.%: 50.5 to 55.90%
j. Tensile strength: 2.90 Mpa
k. Elongation: upto 350% - 400%
l. Solar reflectance index: 106.59 - 106.98